WS-C2960-24LC-S
by Cisco
Original price
€41.65
-
Original price
€49.98
Original price
€41.65
€41.65
-
€49.98
Current price
€41.65
| General | |
|---|---|
| Compliant Standards: | IEEE 802.1ab (LLDP), IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Capacity: | Active VLANs: 64 |
| Features: | auto-negotiation, auto-sensing per device, auto-uplink (auto MDI/MDI-X), Broadcast Storm Control, DHCP support, DiffServ support, Dynamic Trunking Protocol (DTP) support, IGMP snooping, Layer 2 switching, Link Aggregation Control Protocol (LACP), MAC Address Notification, Multicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Port Aggregation Protocol (PAgP) support, Port Security, power over Ethernet (PoE), Quality of Service (QoS), Rapid Spanning Tree Protocol (RSTP) support, Syslog support, Unicast Storm Control, VLAN support |
| Status Indicators: | link/activity, port duplex mode, Port status, port transmission speed, Power, system |
| Remote Management Protocol: | HTTP, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3, Telnet, TFTP |
| Authentication Method: | RADIUS, TACACS+ |
| Enclosure Type: | Rack-mountable 1U |
| Performance: | Forwarding performance (64-byte packet size): 6.5 Mpps, Switching capacity: 16 Gbps |
| Ports: | 24 x 10/100 + 2 x combo Gigabit SFP |
| Flash Memory: | 64 MB |
| Jumbo Frame Support: | 9018 bytes |
| PoE Budget: | 123 W |
| RAM: | 128 MB |
| Device Type: | Switch - 24 ports - Managed |
| Subtype: | Fast Ethernet |
| Power Over Ethernet (PoE): | PoE |
| Miscellaneous | |
|---|---|
| Compliant Standards: | AS/NZS 60950-1, BSMI CNS 13438 Class A, CISPR 22 Class A, CISPR 24, CSA C22.2 No. 60950-1 Second Edition, EN 300 386, EN55022 Class A, EN55024, EN 60950-1 Second Edition, EN 61000-3-2, EN 61000-3-3, FCC CFR47 Part 15, FCC Class A certified, ICES-003 Class A, IEC 60950-1 Second Edition, KN22, KN24, RoHS, UL 60950-1 Second Edition, VCCI Class A |
| Rack Mounting Kit: | Optional |
| Power | |
|---|---|
| Power Device: | Internal power supply |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Features: | Redundant Power System (RPS) connector |
| Expansion / Connectivity | |
|---|---|
| Interfaces: | 2 x 1000Base-T RJ-45, 2 x SFP (mini-GBIC), 8 x 100Base-TX RJ-45 PoE - 15.4 W, 16 x 100Base-TX RJ-45 |